Bering 70

The Bering 70 is the debut model for Bering’s Coastal series. The Bering 70 is designed with a displacement of 132,000 pounds (60 tons) , carries over 1,000 gallons (3,800 liters) of fuel and can cruise for 2,500 miles. Read More »

Bering 70

The Bering 70 is the debut model for Bering’s Coastal series. The Bering 70 is designed with a displacement of 132,000 pounds (60 tons) , carries over 1,000 gallons (3,800 liters) of fuel and can cruise for 2,500 miles. Read More »

Gallery

  • View Exterior Images
  • View Interior Images
  • In Construction Images
  • Certificates
  • Video

Layouts

Specifications

Brief Specifications
  • Length Overall (LOA)
    70'3" (21.44 m)
  • Waterline Length (LWL)
    68'3" (20.81 m)
  • Beam
    18'27" (5.57 m)
  • Draft (FULL LOAD)
    4'10" (1.24 m)
  • Displacement (FULL LOAD)
    140,000 lbs (70 metric tons)
  • Gross Tonnage
    72 GT
  • Bridge Clearance (Height)
    22' (6.70 m)
  • Cruise Speed
    8 knots
  • Maximum Speed
    11 knots
  • Twin Engines
    Cummins QSB – 6.7 305 MHP (224 kW), 2600 RPM
  • Watertight Bulkheads
    3
  • Fuel
    1,825 gal. (6,910 L)
  • Water
    340 gal. (1,280 L)
  • Grey Water
    170 gal. (640 L)
  • Black Water
    170 gal. (640 L)
  • Range
    2,500 + nautical miles
Full Specifications
  • Length Overall (LOA)
    70'3" (21.44 m)
  • Waterline Length (LWL)
    68'3" (20.81 m)
  • Beam
    18'27" (5.57 m)
  • Draft (FULL LOAD)
    4'10" (1.24 m)
  • Displacement (FULL LOAD)
    140,000 lbs (70 metric tons)
  • Gross Tonnage
    72 GT
  • Bridge Clearance (Height)
    22' (6.70 m)
  • Cruise Speed
    8 knots
  • Maximum Speed
    11 knots
  • Twin Engines
    Cummins QSB – 6.7 305 MHP (224 kW), 2600 RPM
  • Watertight Bulkheads
    3
  • Fuel
    1,825 gal. (6,910 L)
  • Water
    340 gal. (1,280 L)
  • Grey Water
    170 gal. (640 L)
  • Black Water
    170 gal. (640 L)
  • Range
    2,500 + nautical miles

Hull

  • Hull constructed using AH-36 marine grade steel. Bottom plates and integrated tanks sides – 6 mm. Hull sides – 6 mm.
  • The hull is divided by three watertight bulkheads creating four compartments.
  • Superstructure made of 6 mm marine grade aluminum. 
  • Hard top, mast and furniture (on flybridge and on cockpit) are made of fiberglass.
  • The hull below the waterline is covered with three layers of black antifouling paint.
  • Hull above the waterline, deck and superstructure are painted.
  • Yacht quality fairing above the waterline with paint finish.
  • All bulkheads are reinforced steel construction, with sound and heat insulation per Bering Yachts drawings.
  • All the interior steel surfaces of the vessel are treated with epoxy primer after thorough surface preparation.
  • Appropriate zinc plates installed for galvanic protection.

Engines

  • (2) Cummins QSB – 6.7– 305 MHP (224 kW), 2600 RPM marine diesels. Combined total power of 610 HP. EEC4 electronic engine control in the pilothouse. Cummins dual engine color display in the pilothouse.
  • (2) Marine transmissions with 3:1 reduction gear. 
  • (2) Stainless steel propeller shafts.
  • (2) 5-blade 32/30″  propellers.
  • (2) Sea water intake with 2” strainers for engines.
  • GP-3014-24 (4 valves 24V) oil change system for engines and generators.
  • GP-3012-24 (2 valves 24V) oil change system for gear boxes.
  • (2)Vertical combo-sep mufflers with (2) exhaust mixers. Exhaust outlets on port side of the hull.

Steering System

  • (2) 6 square foot air foil steel rudders with 60mm diameter stainless steel rudder stock mounted on rudder shoe bearings. 
  • Hydraulic power steering system.
  • Zinc anodes on rudders to ensure galvanic corrosion protection.

Mooring System

  • (2) N type 80Kg stainless steel anchors. Fitted using 316 stainless steel pockets – port and starboard.
  • Chain locker with fresh water flush system, drains overboard.
    120 m of 12mm zinc coated anchor chain per side. Rated for high working loads.
  • 316 polished stainless steel bow protection plate.
  • (2) Vertical windlasses with electrical motor 3500W, 24 V. With drum and Chain stopper. Gypsy for chain ISO 12 mm. Or similar.
  • (2) Capstans D130 mm with electrical motor 1000W 24V. Or similar.
  • (8) 12″ Heavy duty stainless steel bollards installed on bow and aft deck on each side of the boat, including 2+2 bollards on the each side of the cockpit. All mooring components are polished stainless steel with chafe guards.
  • Electric bow and stern thrusters SEP240/300TC, 24V, 15 HP (11.4 kW) equipped with proportional control joysticks in the pilot house.

Electrical System

  • a. Main features
  • Entire AC and DC electrical system designed and installed in compliance with CE electrical standard.
  • 50 Hz 220V AC power standard.
  • 24V DC power standard.
  • Primary distribution 220V AC electrical panel and main swith of 24 V DC are located in the salon. Inverters, battery chargers, batteries and battery management panel are located in the engine room.
  • Primary distribution 24 V DC electrical panel is located in the companionway on the lower deck near gate to Engine room.
  • Secondary 220V AC, 24VDC and 12VDC panels are located in the pilot house.
  • All wires are labeled at each end.
  • All wire connections are properly insulated.
  • All electrical hardware is bonded to the hull.
  • Dedicated circuit breaker for each circuit.
  • b. Power source
  • GENERATORS
  • (2) 22.5 kW 230V 50Hz four cylinder generators enclosed in soundshields installed in engine room.
  • (2) Sea water intake with 1-1/4” strainers for generators.
  • Both generators have digital display controls on the primary distribution 220V AC electrical panel in the salon.
  • Both generators have automatic safety shutdowns with fault indicators.
  • (2) 1000 fuel filters with 30 micron elements.
  • ALTERNATORS
  • (2) 60 A alternators on the main engines for charging starting battery bank under way.
  • (2) 25 A alternators on the generators for charging starting battery bank.
  • SHORE POWER
  • 220 V one phase receptical of shore power.
  • 63 Amp shore power breaker box.
  • Marine isolation transformer 15 KWA/220V/64A/50-60Hz.
  • (2) 24/5000 – 230V inverters.
  • CHARGERS
  • (2) Victron Skylla TG 24V 100A chargers (90-265V AC/45-65Hz or DC) for charging house bank (200A) and starting battery (4A + 4A) from generator or shore power.
  • Victron Skylla TG 24V 50A chargers (90-265V AC/45-65Hz or DC) installed in Crew room for charging bow bank (for two winches and bow thruster) from generator or shore power.
  • DC-DC CONVERTER
  • 24/12-25A converter for electronics in the pilot house.
  • BATTERIES
  • (14) Victron high quality AGM type, deep cycle, 220 A/h 12V DC batteries.
  • (2) 220 A/h AGM batteries for the engines start with crossover switch. Connected in series for 24V DC.
  • (2) 220A/h AGM batteries for the generators start with crossover switch. Connected in series for 24V DC.
  • (2) 220 A/h AGM batteries for bow thruster and two windlasses. Connected in series for 24V DC.
  • (8) 220 A/h batteries for house bank.
  • All batteries covered with fiberglass caps.
  • All starting batteries charged by engine or generator driven alternators.
  • House batteries charged by generators or shore power.
  • Battery cut-off switches located in the engine room.
  • c. Lighting system and power outlets
  • All interior lights are 24V DC LED.
  • Exterior lights (LED) are waterproof to IP-67standards.
  • LED deck flood lights mounted forward, aft and sides.
  • LED flood lights facing mast.
  • LED rope lights and courtesy lights for selected areas.
  • (4) LED lights for engine room.
  • (2) 220V AC fluorescent lights for the engine room.
  • Search light Jabsco 24V.
  • d. Controls and alarms
  • Poseidon monitoring and control system.
  • (2) generator digital LCD displays mounted in the AC electrical panel, each with start/stop button.
  • (2) twin engine throttle controls in pilothouse.
  • Cummins engine 7″ color monitors mounted on pilothouse dash.
  • Fuel filters have pressure gauges.
  • Steering control in the pilothouse.
  • All electric bilge pumps have manual/auto rocker switches.
  • Bilge pump system display panel with “ON” indicators with bilge pump and high water sensor audible alarms.
  • Windshield wipers control in pilothouse.
  • Windshield washdown control in the pilothouse.
  • Search light switch with remote controls in the pilothouse.
  • Dual trumpet marine horn switch in the pilothouse and on the flybridge.
  • (5) fuel tank level sensors and (2) visual fuel gauges on each day tank.
  •  Level sensor for fresh water tank.
  • Gray water tank level sensor.
  • Black water tank level sensor.
  • Central smoke alarm.
  • Engine room fire alarm.

Fire alarm and safety system

  • Smoke alarm system
  • Smoke/Heat Detector in each room.
  • Carbon Monoxide Detector in each room on lower deck and engine room.
  • automatic deployment fire suppression canister in the engine room.
  • Remote control pull handle for manual deployment of certain system in engine room from cabinet on the cockpit.
  • system includes automatic shut off for engines, generators and air intake fan.

Bilge pump system

  • (13) 2,200 gallons/hour bilge pumps.
  • Each bilge has an Ultra SR automatic high water alarm bilge pump switch installed.
  • Vented loops 1-1/2″, on bilge pump discharge hoses.
  • Bilge pump system display panel with “ON” indicators with bilge pump and high water sensors audible alarms.

Fuel system

  • (2) Main fuel tanks and one spare tank. Total 5,310 liters.
  • (2) “Day Tank” fuel tanks. Total capacity 1,600 liters.
  • (4) 1″ ventilation hoses of each tank.
  • Fuel level monitoring of all tanks with pressure / ultrasonic sensors in each fuel tank.
  • Visual fuel gauges on each day tank.
  • MA-6 fuel intake manifold with 1/2″ fuel hoses.
  • MA-6 fuel outflow manifold with 1/2″ fuel hoses.
  • MA-4 aluminum fuel feed manifold with 1/2″ valves and fuel hoses to each engine and generator.
  • Fuel polishing and transfer system – 210 GPH, Series – ‘S’ Class, marine version, 7 day digital timer, with fuel conditioner.
  • Central fuelling station with steel pipe connections for the 2 main tanks.
  • Day tanks provide fuel feed for main engines and generators.
  • Cummins engines equipped with 75/1000 dual filter/separators using 30 micron filter elements and including vacuum pressure gauges.
  • Generators equipped with 1000 fuel filter/separators using 30 micron filter elements and including vacuum pressuregauges.

Fresh water system

  • Built-in 1,280 litres fresh water tank. Steel construction with baffles and inspection hatch, coated with FDA approved enamel.
  • 1″ water tank ventilation hose.
  • Fresh water tank includes inspection hatch, sight gauge, shut-off valves, and 1-1/2″ hose water intake.
  • (2) fresh water pumps XR-124 24V, 45 PSI, 16 gallons/60 liters per minute. 26 gallons/100 liters PT-102 accumulator pressure tank.
  • PPR piping for fresh water lines.
  • (2) 20 gallons marine water heaters.
  • Fresh water pump 24V, 10 PSI, 3,5 gallons/14 liters per minute installed in Engine room.
  • Inlet PPR piping 3/4″ from fresh water tank. Outlet PPR piping 3/4″ from the pump in ER to Marine Flush Mount Stainless Steel Water Hose Deck Fittings.
  • Fresh water hose bib for wash down on the boat deck.
  • Fresh water hose bib for wash down on the bow deck.
  • Fresh water hose bib for wash down on the cockpit.

Black and grey water systems

  • Discharge operating system with keis install in pilot house.
  • 640 liters integrated gray water tank with enamel coated interior to seal the steel tank. Dometic overboard pump 24V, manual overboard pump.
  • 640 liters integrated black water tank with enamel coated interior to seal the steel tank. Dometic overboard pump 24V, manual overboard pump.
  • (2) 1” ventilation hoses for each tank – Gray water and Black water. One vent on each side of the boat for cross flow circulation.

Sea water system

  • Engines and generator(s) are sea water cooled with stainless steel sea cocks and strainers.
  • Sea chest integrated to the hull. Located in the engine room.
  • Sea water intake with (2) 2” strainers for engines, (2) 1 1/4” sea water intakes for generators, (1) 1½ ” for air conditioner.
  • All through hull fittings and sea cocks are stainless steel.
  • All sea waterlines are made of flexible hoses rated for saltwater.

Air conditioning, heating, ventilation systems

  • сentral chilled water system.
  • air conditioning units:
  • Saloon/Galley – 2 x18,000 BTU;
  • Pilot House – 18,000 BTU;
  • Master Stateroom – 18,000 BTU;
  • Guest VIP Stateroom (Forward) – 9,000;
  • Guest Stateroom (Port) – 9,000 BTU.
  • Independent exhaust ventilation systems from heads, 24VDC.
  • Engine room both feature intake and outflow blowers. (2) fans, 24VDC.
  • PPR piping with termo isulation for chiller water lines.

Insulation

  • Engine room insulated with 50mm rockwool insulation per Bering Yachts drawings.
  • sound and vibration insulation is used for engine room and fore bulkheads.
  • Aluminum panel for ceiling and walls in the engineroom
  • Engine exhaust pipes wrapped and finished with carbon fiber covers.
  • composite sound insulation between the engine room and living quarters.
  • All bulkheads, ceiling, hull sides have acoustic and thermalinsulation.

Engine room

  • Engine room access via watertight door and hatch.
  • Engine room insulated with 50mm rockwool and sound / vibration insulation per Bering Yachts drawings .
  • Aluminum panels for the ceiling and walls in the engine room.
  • Soundproof fiberglass flooring with anti-slip surface.
  • Engine exhaust pipes wrapped and finished with fiberglass covers.
  • (2) Cummins QSB 6.7 305 MHP (224 kW), 2600 RPM marine diesels. Combined total power of 610 HP.
  • (2) vertical combo-sep mufflers with (2) exhaust mixers. Exhaust outlets on port and starboard sides of the hull.
  • Main engines installed on soft engine mounts with weigh tadjusters.
  • GP-3014-24 (4 valves 24V) oil change system for engines and generators.
  • Cummins engines equipped with 75/1000 dual filter/separators using 30 micron filter elements and including vacuum pressure gauges.
  • fuel polishing and transfer system – 210 GPH, Series – ‘S’ Class, marine version, 7 day digital timer with fuel conditioner.
  • (2) “Day Tank” fuel tanks. Total capacity 420 gallons/1,600 litres
  • (2) Visual fuel gauges on “day tanks”.
  • MA-6 fuel intake manifold with 1/2″ fuel hoses.
  • MA-6 fuel outflow manifold with 1/2″ fuel hoses.
  • MA-4 aluminum fuel feed manifold with 1/2″ valves and fuel hoses to each engine and generator.
  • A marine transmissions with 2.476:1 reduction gear.
  • GP-3012-24 (2 valves 24V) oil change system for gear boxes.
  • (2) Stainless steel propeller shafts.
  • (2) 22.5 kW 230V 50Hz four cylinder generators enclosed in soundshields installed in engine room.
  • generators equipped with Racor 1000 fuel filter/separators using 30 micron filter elements and including vacuum pressure gauges.
  • (2) Phoenix 24/5000 – 230V inverters.
  • (2) TG 24V 100A chargers (90-265V AC/45-65Hz or DC) for charging house bank (200A) and starting battery (4A + 4A) from generator or shore power.
  • (2) 220 A/h  AGM batteries for the engines start with crossover switch. Connected in series for 24V DC.
  • (2) 220A/h  AGM batteries for the generators start with crossover switch. Connected in series for 24V DC.
  • (8) 220 A/h batteries for house system.
  • Sea chest is integrated to the hull.
  • Sea water intake with (2) 2” strainers for engines, (2) 1 1/4” sea water intakes for generators, (1) 1½ ” for air conditioner.
  • (2) fresh water pumps XR-124 24V, 45 PSI, 16 gallons/60 liters per minute. 26 gallons/100 liters PT-102 accumulator pressure tank.
  • сentral chilled water system – total capacity 81,000 BTU with reverse cycle heating.
  • Engine room features both intake and outflow blowers.
    (2) CEM fans, 3’’ inlet and outlet, 24VDC.
  • (4) bilge pumps – 2,200 gal/hour.
  • (4) Ultra SR automatic bilge pumps switches with built-in isolated high water alarm switch (at 3″).
  • Storage cabinets.
  • Fluorescent and 24V DC LED lights.
  • Covered GFCI duplex electrical outlet.
  • Smoke and heat alarm sensors.
  • CO alarm.
  • automatic deployment fire suppression canister.

Outfitting

  • a.Flybridge
  • Flybridge control station with dash console comprises efficient layout of the vessel electronics and machinery controls -optional .
  • 30″ diameter stainless steel destroyer steering wheel – optional.
  • LX II helm chair with white leather – optional .
  • Teak deck – optional .
  • Access from the boat deck.
  • Stainless steel drains for evacuation of water overboard.
  • Fiberglass molded-in settees with storage beneath.
  • Teak folding table in front of settee.
  • Second teak table in front of settee – optional .
  • Fiberglass rigid roof with arch for mast – optional .
  • Stainless steel framed venture windshield with dark acrylic panels.
  • Stylized fiberglass mast to support and mount navigation antennas, radar arrays, communication domes and lights.
  • Search light with joystick (remote control) operation from the pilothouse.
  • 12-inch white searchlights. 220 VAC lamp with joystick (remote control) operation from the pilothouse –
    optional .
  • Aft facing deck flood lights.
  • (6) 40W, LED flood lights mounted aft, forward, port and starboard – optional .
  • LED courtesy lighting along walk way.
  • Buell dual trumpet air horn.
  • NaviLED navigation lights.
  • NaviLED Anchor light.
  • Bering 70 name insignia signs mounted on both sides of the flybridge.
  • b. Boat deck
  • Teak deck – optional .
  • 44″ high stainless steel safety rails.
  • 66″ stainless steel flagpole.
  • Fresh water hose bib for wash down.
  • Fiberglass molded-in settees with storage beneath – optional .
  • Mini-kitchen with sink and grill – optional .
  • Steelhead ES-1500 four function hydraulic yacht crane with 12′ reach and 1,500 lbs. lifting capacity with remote control –
    optional .
  • Dinghy – optional .
  • SS dinghy’s cradle with tie down securing straps – optional .
    (2)LR 8 person SOLAS life rafts installed, one to port, one to starboard – optional .
  • LED courtesy lights.
  • c. Bow deck
  • Teak deck – optional .
  • 44″ high stainless steel 2″ safety rails.
  • 66″ stainless steel flagpole.
  • Fresh water hose bib for wash down.
  • Bofor flush deck hatch access to crew cabin.
  • (2) 4000 electric winches with on deck foot switches. Dual chain stoppers with tensioners. Stainless steel, grooved bow rollers.
  • (2) Heavy duty stainless steel bollards.
  • Fiberglass molded-in settees with storage beneath.
  • Teak folding table in front of settee – optional .
  • d. Main deck
  • Teak deck – optional .
  • 44″ high stainless steel 2″ safety rails.
  • Vents for all fuel and fresh water tanks are located inside the bulwark.
  • Central fueling station recessed into superstructure amidships on starboard. This single fill location allows for convenient replenishment of two fuel tanks.
  • Deck fill for fresh water tank on port side.
  • Gray and black water pump-out station on port side.
  • e. Cockpit
  • Teak deck – optional .
  • 44″ high stainless steel 2″ safety rails.
  • (4) Heavy duty stainless steel bollards.
  • (2) VC1000 (1,000W 24V) electric rope capstans mounted in cockpit – optional .
  • Fiberglass molded-in settee with storage beneath – optional .
  • Teak folding table in front of settee – optional .
  • Scandvik hot and cold fresh water shower boxes – optional .
  • Transom gates port and starboard at aft end of cockpit.
  • CM-7 50 Amp 24VDC shore cord manager – optional .
  • LED courtesy lights.
  • LED overhead lights.
  • Recessed LED flood lights.
  • f. Swim platform
  • Teak deck – optional .
  • Access from swim platform to cockpit via stairs to port and starboard.
  • Armstrong boarding ladder TL4-45DM with four steps – optional .
  • (4) 2″ diameter, 3′ tall, 316 stainless steel removable U-shape rails with self draining stainless steel bases – optional .
  • (4) 12″ stainless steel fold-down cleats.

Interior

  • a. Pilot house
  • 1/2″ thick engineered wood flooring.
  • All interior walls and doors are wood veneer with matte varnish finish.
  • (2) Bofor aluminum weathertight doors – port and starboard.
  • Forward windows (three front and two side) are 19 mm tempered glass.
  • Forward windows (three front and two side) are 19 mm tempered glass with built-in electric heating wires for defrosting -optional .
  • Side windows are tinted glass with pleated window blinds.
  • Overhead panels are black microfiber cloth material.
  • All overhead lights are dimmable LED.
  • Array of red LED lights above the dash console.
  • LED courtesy lights.
  • All pilothouse cabinetry and furniture is varnished wood veneer with solid wood corners.
  • The dash console and window frames are finished with dark soft paint.
  • The dash console are finished with black leather – optional .
  • Dash console comprises efficient layout of all the vessel electronics and machinery controls.
  • 30″ diameter stainless steel destroyer steering wheel with wooden spoke inserts.
  • Built-in leather upholstered helm bench settee for two people.
  • LX II helm chair with black leather and folding foot rest – option .
  • Staircase to Forward VIP stateroom on lower deck.
  • Electrical outlets.
  • 12,000 BTU air conditioning unit.
  • Wood overhead louvers for air conditioning.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • Fire extinguisher.
  • b. Saloon and Galley
  • 1/2″ thick engineered wood flooring.
  • All interior walls and doors are wood veneer with matte varnish finish.
  • Bofor weathertight French door to aft deck.
  • Staircase to lower deck.
  • Tinted 19 mm windows with pleated window blinds.
  • Overhead panels are white microfiber cloth material.
  • Dimmable LED overhead lights.
  • LED kickboard lights below the sink and oven.
  • LED wall lights. TBD.
  • LED courtesy lights.
  • Built-in wood cabinetry for media center featuring a wood with frame for 40″ flat screen LCD TV – optional .
  • 40″ flat screen LCD TV – optional .
  • Built-in settee on port side (with storage lockers under) with varnished teak coffee table.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Galley’s tables with cultured stone.
  • Dining island counter aft of the galley.
  • (4) Counter stools.
  • Cupboards with doors and shelves are varnished wood veneer with solid wood corners.
  • Abundant storage lockers and drawers for storing dishes and galley ware.
  • Electric cooktop. TBD.
  • Stainless steel basin sink with garbage disposal TBD, pull out retractable stainless steel rinsing faucet.
  • Dish drawer. TBD.
  • Electric oven. TBD.
  • 15″ trash compactor – optional .
  • Microwave oven. TBD.
  • Double drawer refrigerator. TBD.
  • Ice-maker – optional .
  • Water filter – optional .
  • Combo Washer and Dryer. TBD.
  • Electrical outlets.
  • 2 x 12,000 BTU air conditioning units.
  • Wood overhead louvers for air conditioning.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • Fire extinguisher.
  • c. Companionway lower deck
  • 1/2″ thick engineered wood flooring.
  • All interior walls and doors are wood veneer with matte varnish finish.
  • Overhead panels are white microfiber cloth material.
  • Watertight doors to master staterooms and engine room.
  • Hatches to bilge compartment.
  • Storage cabinets.
  • All overhead lights are LED.
  • LED courtesy lights.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • CMD-4MR CO alarm.
  • d. Master staterooms
  • 1/2″ thick engineered wood flooring.
  • All interior walls and doors are wood veneer with matte varnish finish.
  • Watertight door to the companionway.
  • Second (wood) door to the companionway.
  • Mirror on the entry door.
  • Pleated window blinds are covering windows on two side.
  • Overhead panels are white microfiber cloth material.
  • All overhead lights are dimmable LED.
  • LED courtesy lights.
  • (2) LED reading lights over the bed.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Queen-size bed.
  • Storage lockers under bed.
  • Large wardrobe.
  • Night stands with drawers.
  • Built-in corner sofa.
  • Electrical outlets.
  • Air conditioning unit – 18,000 BTU.
  • Wood overhead louvers for air conditioning.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • CMD-4MR CO alarm .
  • Fire extinguisher.
  • e. Master head
  • Ceramic tile floors.
  • Electric floor heating with control unit – optional .
  • Ceramic tile walls.
  • Overhead panels are fiberglass.
  • Wood door from the master room.
  • Deadlight with pleated window blinds.
  • All overhead lights are LED.
  • LED courtesy lights.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Vanity with countertop.
  • Ceramic sink with SS faucet.
  • Mirrors above the vanity.
  • Shower cabin with glass door.
  • SS shower.
  • Drawer for shampoo, towels, etc.
  • 8700 electrical fresh water toilet.
  • Multiple duplex electrical outlets GFCI.
  • Electric towel dryer – optional .
  • Exhaust ventilation.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • f. Forward VIP stateroom
  • 1/2″ thick engineered wood flooring.
  • All interior walls and doors are wood veneer with matte varnish finish.
  • Pleated window blinds are covering windows on two side.
  • Overhead panels are white microfiber cloth material.
  • All overhead lights are dimmable LED.
  • LED courtesy lights.
  • LED reading lights.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Queen size bed.
  • Wardrobe with mirror on inside door.
  • Electrical outlets.
  • 12,000 BTU air conditioning unit.
  • Wood overhead louvers for air conditioning.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • CMD-4MR CO alarm .
  • Fire extinguisher.
  • g. VIP head
  • Ceramic tile floors.
  • Electric floor heating with control unit – optional .
  • Ceramic tile walls.
  • Overhead panels are fiberglass.
  • Deadlight with pleated window blinds.
  • All overhead lights are LED.
  • LED courtesy lights.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Vanity with  countertop.
  • Ceramic sink with SS faucet.
  • Mirrors above the vanity.
  • Shower cabin with glass door.
  • SS shower.
  • Drawer for shampoo, towels, etc.
  • 8700 electrical fresh water toilet.
  • Multiple duplex electrical outlets GFCI.
  • Electric towel dryer – optional .
  • Exhaust ventilation.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • h. Port guest staterooms
  • 1/2″ thick engineered wood flooring.
  • All interior walls and doors are wood veneer with matte varnish finish.
  • Pleated window blinds are covering windows.
  • Overhead panels are white microfiber cloth material.
  • All overhead lights are dimmable LED.
  • LED courtesy lights.
  • LED reading lights.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Double size bed.
  • Storage lockers under bed.
  • Pullman bed.
  • Large wardrobe with mirror on inside door.
  • Desk under window.
  • Electrical outlets.
  • 9,000 BTU air conditioning unit.
  • Wood overhead louvers for air conditioning.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • CMD-4MR CO alarm .
  • Fire extinguisher.
  • i. Head on low deck
  • Ceramic tile floors.
  • Ceramic tile walls.
  • Overhead panels are fiberglass.
  • All overhead lights are LED.
  • LED courtesy lights.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Vanity with countertop.
  • Ceramic sink with SS faucet.
  • Mirrors above the vanity.
  • SS shower.
  • Drawer for shampoo, towels, etc.
  • 8700 electrical fresh water toilet with bidet.
  • Multiple duplex electrical outlets GFCI.
  • Exhaust ventilation.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • j. Crew cabin at forepeak – optional .
  • Ceramic tile floors.
  • All interior walls are plastic panels.
  • Deadlight porthole with pleated window blinds.
  • Overhead panels are fiberglass.
  • All overhead lights are dimmable LED.
  • LED courtesy lights.
  • LED reading lights.
  • All cabinetry and furniture is varnished wood veneer with solid wood corners.
  • Single size bed.
  • Storage lockers under bed.
  • Desk.
  • 8700 electrical fresh water toilet with bidet.
  • Electrical outlets.
  • 9,000 BTU air conditioning unit.
  • Overhead louvers for air conditioning.
  • Exhaust ventilation.
  • AP65-PESD-02-TB-R smoke alarm sensor.
  • CMD-4MR CO alarm .
  • Fire extinguisher.

Miscellaneous

  • As-built Owner’s manual in English. Includes descriptions and systems drawings.
  • Set of Warranty Certificates.
  • Set of manuals and certificates relating to materials and equipment.
  • Tool box.
  • Spare parts for equipment, supplied by manufacturers.

Electronics and Navigation Equipment (TBD) - OPTIONAL

  • (2) Black box TZTBB system.
  • (2) HD monitor model 24T21 MMD-MA1-FOGP.
  • (4) Multy display model FI-507.
  • Data organizer model RD33 .
  • Rudder Indicator model FI506.
  • (2) Radar model DRS25A (PSU13).
  • (2) Antenna model XN13A/6 (6 foot open array).
  • (1) Depth finder model DFF1 BB.
  • (2) Transducer model 556TID-LTD/12.
  • Satellite compass model SC-30.
  • Converter for SC30 model IF-NMEASC NMEA.
  • GPS receiver model GP33 .
  • GPS antenna receiver model GP330B.
  • Weather station instrument model 200WX.
  • Transponder model FA 50 AIS Class B.
  • AIS antenna 2,5m
  • Converter CAN bus/NMEA2000 model IF-NMEA2K2
  • (2)  FI-5002 Junction Box
  • (2)  HUB-101 Ethernet Hub
  • Navpilot control unit, processor, rudder reference model 711C .
  • Rate heading sensor model PG 700
  • Pump model PUMPHRP05-24.
  • (2) KVH  model V7-IP (empty dome/baseplate).
  • KVH  model V3-IP KU-band antenna.
  • KVH model TV3 w/IP-enabled TV-hub B-Linear.
  • Iridium satellite phone standard package model Extreme 9575.
  • (2) VHF radio model M506-41 (Rear Mic), compliant to new FCC Class D DSC.
  • (2) VHF antenna 2,5m
  • (4)Hand held VHF radio model M88-01-5W (compact radio).
  •  ACR-2842 Class A EPIRB Pro 406 CAT I w integral GPS
  •  ACR SART-2714NH PatFinder3 Transponder w Bracket
  • Set CCTV: six cameras
  •  DVD / Receiver model MS-AV700i
  • Receiver/media player with full iPod/iPhone control model MS-RA205
  • (4) 5 channel marine amplifier model MS-DA51600 1600 Watt D Class.
  • (4)  6″ ceiling speakers model MS-CL602 120W.
  • (4)  7″ speakers model MS-FR7021 260 Watt. White/Black 2 grilles including.
  • (4)  10″ woofer model MS-SW10 400W.

Overview

The Bering 70 is the debut model for Bering’s Coastal series. She has been designed from the keel up to be the ideal vessel for extensive coastal cruising due to her shallow draft.  Her hull shape and profile let you easily recognize that the Bering 70 is an atypical motoryacht that is incredibly stylish. A reverse-raked bow is seldom seen in yacht designs of this size. The absence of a large overhanging bow means that there is less reserve buoyancy to create lift when making contact with an approaching wave. This in turn leads to the hull “slicing” through waves as opposed to riding up and over, thereby dampening pitch at sea. The end result, a smoother ride for everyone on board.

Similarly, her contemporary interior design is a departure from the more traditional styling found on many of today’s long distance motor yachts, but her capabilities are that of a true blue water traveler. Featuring a pilothouse deck, full displacement hull and a range of over 2,500 nautical miles she’s ready to carry you and your guests to far away destination.

Stepping into this ultra modern yacht, you will notice clean crisp lines and a greater use of fabrics and non-traditional woods, all of which suggests a more contemporary tone than the more traditional teak and holly interiors and dated fabrics that have become the industry standard among many builders. The saloon flows seamlessly forward into the pilothouse creating a tremendous sense of space. Additionally, the use of large glass panels throughout the saloon and the pilothouse create a refreshingly open and airy feeling while aboard.

The galley blends perfectly into the saloon space, creating one large communal area which is ideal for entertaining. The galley area and dining table are on the port side along with the forward L-settee. The starboard side cabinetry houses a pop-up flat screen directly across from the settee which allows you to face the TV directly as opposed to having to look off to one side. Custom barrel chairs flank the TV for additional seating.

Like all Bering yachts, the 70 is a semi-custom built boat. Bering’s designers work with each client individually, selecting the fabrics, appliances and galley fixtures that perfectly suit the intended interior styling theme. A wide selection of stone and synthetic counter surfaces can be chosen in addition to the flooring and cabinet materials. Likewise, the exact layout and location of furniture and cabinetry is subject to the owner’s input.

Down below, the staterooms can be configured in any number of ways depending on how you would like to optimize the living spaces. The accompanying layout renderings show just several of the stateroom options available. For example, the Bering 70 can be configured with two large master/VIP staterooms or two facing staterooms can be located amidships with the master forward and a smaller cabin aft. Steel yachts possess tremendous strength and rigidity so you are not limited by the fixed location of structural bulkheads when selecting layouts.

On deck you will enjoy full walk around side decks making for easy line handling and fender placement when docking. A huge sun pad is located immediately forward of the pilothouse. Aft, the partially covered cockpit has plenty of open space for setting out deck chairs or relaxing on the settee cushions. Meals can be served on the beautifully finished cockpit table.

The flybridge deck possesses the same modern feel as the rest of the Bering 70. Two captain’s chairs are mounted forward at the flybridge helm while guests can join you at the settee and table that is immediately aft. A sleek antennae mast carries multiple radar arrays as well as all necessary communication equipment and deck lighting. The aft deck is open to allow for a tender and powered crane.

The Bering 70 is designed with a displacement of 140,000 pounds (70 tons) , carries over 1,262 gallons (4,780 liters) of fuel and can cruise for 2,500 miles.

PDF Brochure
  • B 60
  • B 65
  • B 70
  • B 75
  • B 77
  • B 80
  • B 92
  • B 95
  • B CAT
  • B 106
  • B 115
  • B 130
  • B 145